How Much Does Fence Installation Cost?
Fence installation costs depend on material, total linear feet, post spacing, gate count, terrain, access, demolition, and whether you build it yourself or hire a crew.
9 min read
Use these ranges to sanity-check bids and budget materials. Local access, soil, and season can move prices a lot.
12 guides
Work out quantities and costs before you read further.
Pick a project, enter its size, and set your market. You'll get a DIY material cost and an installed cost range, with the drivers behind the spread spelled out.
OpenBuild a service plan and see what it costs per visit, per month, and per year. Mowing usually accounts for most of the total, and lawn size matters less than people expect.
OpenEnter your patio or walkway size and paver dimensions to get the paver count plus every layer underneath, base depth by traffic type, bedding sand, joint sand, and edging.
OpenFence installation costs depend on material, total linear feet, post spacing, gate count, terrain, access, demolition, and whether you build it yourself or hire a crew.
9 min read

A gravel driveway is cheaper than concrete or pavers, but the final price depends on length, width, depth, base rock, surface stone, fabric, edging, and delivery access.
8 min read

Retaining wall costs depend less on length than homeowners expect and more on height, drainage, backfill, access, and whether the wall is decorative or structural.
9 min read

A plain broom-finished concrete patio runs $8 to $20 per square foot installed. Stamped and coloured roughly doubles that, and the finish choice matters less than the base and the control joints.
5 min read

Concrete walkways run $7 to $16 per square foot installed. Public-right-of-way sidewalks cost more because they must meet municipal specifications for thickness, slope, and accessibility.
5 min read

Landscape lighting runs $150 to $450 per fixture installed. The transformer, wire, and timer are a fixed cost regardless of fixture count, which is why small systems cost more per light.
5 min read

Landscaping costs vary more by market and site access than by anything on a spec sheet. A full front-yard renovation commonly lands between $5,000 and $25,000, and the spread is mostly excavation, access, and disposal.
6 min read

Overseeding a 5,000 sq ft lawn costs roughly $90 to $250 in seed doing it yourself, or $400 to $900 as a service with aeration included. Seeding costs a fraction of sod and takes a full season.
5 min read

Patio cost per square foot ranges from about $4 for gravel to over $50 for premium stone. The cheapest to install is rarely cheapest over twenty years, and the gap narrows once repair is priced in.
5 min read

Paver walkways run $15 to $34 per square foot installed, more per square foot than a patio because there is far more cutting and edging per unit of area.
5 min read

A conventional gravity septic system runs $7,000 to $15,000 installed. Mound and aerobic systems can double that, and the deciding factor is your soil, not your budget.
6 min read

Sod material runs $0.35 to $0.85 per square foot and a pallet covers 400 to 500 sq ft. Professional installation roughly doubles the total, and ground preparation is frequently the larger line.
5 min read